|
|
|
|
|
Crushed Stone Sleepers Rails |
| |
|
IMMAGINE |
DESCRIZIONE |
PDF |
|
 |
DEBRIS HAULING HOPPER WAGON CAD
8.5 The CAD 8.5 hopper
wagon for transporting debris, patented by Dipsa Technes, has a
hopper load-bearing frame on Y 25 RIV bogies, a top loading belt,
a series of hatches that unload the ballast onto two
longitudinal belts below, and a rotating inclined belt at the
front of the wagon for unloading or loading the next wagon. |
 |
|
 |
CONVEYOR BELT NAT
NAT is a high capacity conveyor
belt that can be installed on hopper wagons to transport debris
for high production ballast screeners. NAT has two innovative
characteristics (Dipsa Technes system) that make it unique: the
sliding retration and the mobile head on the side where the
debris is loaded lets you avoid using a buffer wagon, and the
conveyors for directing the ballast in the wagon are positioned
under the belt, which increases the capacity of the wagon. |
|
|
 |
RAIL CLAMPS PFS-R |
|
|
 |
BMV-S SHAKE-OUT BUCKET |
|
|
 |
COMPACTING PINCER CLAMPS PFS-C |
|
|
 |
SLEEPERS PINCER CLAMPS PFS-T |
|
|
 |
RAIL CUTTING OFFMACHINE MTR |
|
|
 |
OIL-PRESSURE PRESS PRS
The PRS is an oil-pressure press
for carrying out bending tests on samples of flash-butt welded
rails 1.5 m long, in accordance with CE.SI.FER. technical
regulations “RFI TCAR ST AR 07 001 A f 32/35” for rails welded
on site. |
|
|
 |
HYDRAULIC SHEARS FOR
ALUMINO-THERMIC WELDINGS TAT
TAT is a hydraulic shearing
machine designed for the hot removal of alumino-thermic weld
allowances from the sides and rolling surface of the rail head. |
|
| |
To contact us:
 |
|
