|
|
|
Coupling Machines |
| |
|
PICTURE |
DESCRIPTION |
PDF |
|
 |
MACHINE FOR LOCKING AND UNLOCKING
FASTCLIP COUPLINGS FAC4
The FASTCLIP is a new rail fixing
system that uses connecting elements pre-assembled and pre-fixed
on the sleepers.
Dipsa Technes has realised the FAC 4 machine, which locks and
unlocks all 4 FASTCLIP couplings at the same time, so just one
operator can fix a full sleeper to the rails. |
 |
|
 |
PORTABLE SLEEPERS DRILLING MACHINE
FOP
Engine power 1,3 KW STIHL made,
two-strokes, fuel supply mixture 2%
Closed frame-handlebar protects engine and gear system during
handling and reduces vibrations in the handgrip. |
|
|
 |
OLEODYNAMIC SCREW-SPIKING MACHINE
IOL
The machine is designed for the
fitting on and removal of screw-on couplings. The adjustable
torque wrench setting is indicated in the gauge. The adjustable
tightening torque is shown on the appropriate pressure-gauge. |
|
|
 |
SUPER-LIGHT ELECTRONIC
SLEEPER-SCREW SPIKING MACHINE IES
The machine has been designed for
screwing or unscrewing fastening systems. A generator with a
4-stroke endothermic engine is envisaged, required to power an
electric motor with a nominal power consumption of 550 Watts. |
|
|
 |
SUPER-LIGHT ELECTRONIC
SLEEPER-SCREW DRIVING MACHINE FOR VOSSLOH RAIL COUPLINGS IES2
The IES 2 – VOS with two spindles
has been designed to screw and unscrew VOSSLOH elastic rail
couplings. |
|
|
 |
PORTABLE IMPULSE POWER SCREWDRIVER
MOP The machine is
provided with 2-strokes engine, ACTIVE made, 52 cm3, pull
startup and automatic rewinding. Fuel supply mixture 4%. |
|
|
 |
PANDROL CLIPS-FITTING MACHINE PIP
LAYER Dipsa Technes has
produced a machine for fitting Pandrol PIP plates with which the
operators, sitting on the two rails, take two plates and
position them on the sleeper to the sides of the rail flange; if
the rail has been moved and the plastic plate can’t be
positioned, the operator moves the same with a pedal that
activates the aligning tongs. |
|
|
 |
FOUR PANDROL COUPLINGS FITTING
MACHINE SAP 4 One of the
essential operations in the laying of new tracks or the
replacement of existing ones is that of securing the rails to
the sleepers by means of anchoring couplings. PANDROL, a
commonly used coupling, requires a great number of workers to
secure all the sleepers. Dipsa Technes has developed and
patented SAP4, a new machine which is capable of simultaneously
fitting on four couplings and requires only one operator to run. |
|
|
 |
DOUBLE PANDROL COUPLINGS FITTING
MACHINE SAP 2 Dipsa
Technes, after having patented SAP 4, for four Pandrol couplings
fitting, has developed an easier version that in addition to
lifting up the lowermost sleeper simultaneously also fits in two
couplings. |
|
|
 |
RAIL COUPLING SHEARS TOA 3
Loosening of rusty, damaged, or
time-worn rail couplings for track maintenance and/or rail
replacement is a particular arduous operation. TOA 3, patented
by Dipsa Technes, has been especially designed to overcome these
difficulties: the machine is capable of simultaneously operating
on two couplings on the in-and outside of the rail so as to
completely release it from the plate seat. |
|
| |
